SYUKUYU Page turner for ebooks SPT04

Product Name : E – book Page Turner
Charging interface : Type – C
Charging input :5.0 volts DC

Instructions for Using the Page Turner :

Step 1: Press the power button on the receiver to turn it on
The factory default is pre – matched . After pressing the button on the receiver to turn it on , press the button on the transmitter again to see if the indica – tor light on the side of the receiver on ( if it is on , it can be used normally )

Step 2: Clamp the receiver chu ck onto the screen
The chuck of the receiver should be as close to the screen as possible and not be suspended , The first time you use it , you can try several positions on the screen to find the ideal screen usage area .
For the Kindle Voyage model , it is rec – ommended to read in landscape mode . In portrait reading mode , it is suggested to clamp the receiver chuck at the lower right corner of the screen
Step 3: Press the buttons on the remote control to turn the pages If you don ‘ t want to turn the page , you can turn on the phone ‘ s camera mode and clamp the receiver ‘ s chuck at the position ofthe photo touch circular icon . Press the buttons on the remote control to see if you can take photos normally , If so , Please contact the offi – cial customer service and inform them of the kindle model so that they can an – alyze the problem in a timely manner .

Common Issues:
Receiver ( RX ) and Transmitter ( TX ) fail to pair .
Signal crosstalk occurs when two sets of products are used simultaneously . The above issues can be resolved by re – pairing . Below is the product re – pairing method :
Pairing between Receiver ( RX )/ Transmitter ( TX ):
1.Press the button on the Receiver ( RX )→ The indicator light stays on , indicating it is waiting for pairing . At this time , simply press the button on the Transmitter ( TX ) to complete pairing successfully .
2.2.If you wish to re – pair with another Transmitter ( TX ), press the button on the Receiver ( RX ) again . The indicator light will stay on once more to enter pairing mode . During this period , press the button on the Transmitter ( TX ). The Receiver ( RX ) indicator light will turn off – pairing is completed successfully .
Note : After pairing , each set operates independently and does not interfere with the other .

Precautions for Use:
The receiver does not need to be turned off . It will auto – matically go into sleep mode if there is no signal input for 30minutes. Just press the side button of the receiver to turn it on before each use . The receiver can be used for about 20 days when fully charged , and the remote control can be used for more than half a year ( provided that you read for 2 hours ever day ). If the indicator lights of the receiver and the remote control do not flash red , there is no need to charge . Try to remove the receiver as soon as possible after each reading . This will extend the service life of the receiver .